Retaining Wall Block Calculator – Courses, Blocks & Caps
Estimate courses, blocks, and caps for a straight, level run of retaining wall. Include buried courses and use the installed face dimensions of the chosen block.
Worked exampleHow many blocks for a 24 ft retaining wall with four exposed courses?
A 24 ft run takes 24 blocks per course when each block covers 12 inches. Four exposed courses plus one buried course take 120 blocks. At 5% allowance, the order is 126 blocks.
At the same 12-inch coverage, 24 caps before allowance round to 26 to order. Count corners, end units, and returns separately from a straight run.
The estimate is 126 blocks and 26 caps with allowance. Check whether the supplier sells split pallets.
Buying and sizing notes
- Use the manufacturer’s system details for base, setback, drainage, geogrid, and allowable wall height. This tool estimates quantities only.
How to use this estimate
What this includes
- The required inputs shown on this page
- common planning assumptions
- optional advanced adjustments where provided
What it does not include
- site-specific professional design
- local code approval
- manufacturer-specific requirements
- installation quality
Common mistakes
- Leaving a required input at the default when your situation is different
- ignoring product labels or ratings
- treating the estimate as an exact final answer
Related calculators
Helpful tools for nearby decisions.
Gravel Calculator
Estimate gravel tons and cubic yards from area, depth, density, compaction, waste, and base-material planning for driveways, slabs, paths, and pads.
Open calculator → Materials & ProjectsPaver Base
Estimate compacted gravel base and bedding sand for patios and walkways from area, base depth, sand depth, density, waste, and compaction.
Open calculator → Geometry BasicsLinear Feet
Add lengths in feet and inches for trim, fencing, or railings. Use stock width to convert between linear feet and square footage.
Open calculator → Materials & ProjectsFrench Drain Gravel
Estimate French drain gravel in cubic yards and tons. Enter trench dimensions, pipe outside diameter, order allowance, and supplier density.
Open calculator →