RightSizeTools Practical sizing calculators
Geometry Basics

Linear Feet Calculator – Runs, Stock Width & Coverage

Add measured lengths for trim, railing, or fencing. To convert square feet to linear feet, enter the coverage width of the stock.

Worked example Add runs or convert area

Run and stock measurements

ft
in

See estimate and breakdown

Advanced settings
in
%
Add runs or convert known square footage

With a known area entered, the calculator uses it and the stock coverage width in place of measured runs.

Convert 60 square feet to linear feet for 6-inch trim

A 6-inch coverage width is 0.5 ft. Divide 60 sq ft by 0.5 ft to get 120 linear ft. A 10% allowance makes it 132 linear ft.

Confirm the installed coverage width before converting. For separate runs, add the actual lengths and check whether the stock length creates short offcuts.

This takes 120 linear feet before allowance and 132 linear feet with 10% extra.

Buying and sizing notes

How to use this estimate

What this includes

  • The required inputs shown on this page
  • common planning assumptions
  • optional advanced adjustments where provided

What it does not include

  • site-specific professional design
  • local code approval
  • manufacturer-specific requirements
  • installation quality

Common mistakes

  • Leaving a required input at the default when your situation is different
  • ignoring product labels or ratings
  • treating the estimate as an exact final answer

Related calculators

Helpful tools for nearby decisions.