Cubic Yard Calculator – Dimensions, Depth & Volume
Calculate cubic yards from feet and inches, or enter a known area or volume. Get cubic feet, cubic yards, cubic meters, and the order volume with your allowance.
Worked example Convert area or volume Enter feet and inchesHow many cubic yards for a 20 × 10 ft area at 4 inches deep?
Multiply 20 × 10 × 4 and divide by 324. The result is 2.469 cubic yards, 66.667 cubic feet, or about 1.888 cubic meters before allowance.
Use depth in inches with this divisor. Divide by 27 when all three dimensions are in feet.
The measured volume is 2.469 yd³. Try the area mode with 200 sq ft and the same depth.
Buying and sizing notes
- Ask your supplier whether their quantities refer to loose material or compacted depth and how they round orders.
How to use this estimate
What this includes
- The required inputs shown on this page
- common planning assumptions
- optional advanced adjustments where provided
What it does not include
- site-specific professional design
- local code approval
- manufacturer-specific requirements
- installation quality
Common mistakes
- Leaving a required input at the default when your situation is different
- ignoring product labels or ratings
- treating the estimate as an exact final answer
Related calculators
Helpful tools for nearby decisions.
Concrete Bags
Calculate concrete bags and cubic yards for slabs and pads. Compare bagged mix with a delivered ready-mix quote, and include mixer batches and gravel base.
Open calculator → Materials & ProjectsGravel Calculator
Estimate gravel tons and cubic yards from area, depth, density, compaction, waste, and base-material planning for driveways, slabs, paths, and pads.
Open calculator → Materials & ProjectsMulch Calculator
Estimate mulch volume in cubic yards or bags from bed length, width, depth, waste, and landscape-bed coverage assumptions before ordering material.
Open calculator → Materials & ProjectsTopsoil Calculator
Estimate topsoil volume from area, depth, cubic yards, waste, and spreading depth for lawns, beds, fill areas, and yard material planning.
Open calculator → Geometry BasicsCylinder Volume
Calculate cylinder volume from radius and height with cubic feet, cubic meters, gallons, and liters for tanks, tubes, bins, and material planning.
Open calculator → Geometry BasicsLinear Feet
Add lengths in feet and inches for trim, fencing, or railings. Use stock width to convert between linear feet and square footage.
Open calculator →